Best tools for Cord Strapping C11

  By

Best tools for Cord Strapping C11 tool

Are you looking for the best tool for cord strapping? The new Golden Bear C11 battery tensioner is the first and one of the most efficient and reliable battery tensioner/bander for your operations. The powerful battery-powered cord tensioner features the latest in lithium ion technology. Each battery charge delivers up to 300 cycles. With this new tool, it is now possible to use even a drill for pulling the cord strap tight, helping you achieve tensioning force that was not possible in the past.

Configuration

The C11 cord tensioner uses a patent pending drill for driving windlass tensioner. It allows you to use a drill for pulling the cordstrap tight. Use the Milwaukee 18V drill that is designed for rugged outdoor applications. It generates a staggering 2,700 lbs tensioning force in High Torque Mode. You could also achieve high-speed operations in the High Speed Mode.

Advantages of Using C11 Cord Strapping Tool

  • Get up to 300 tensioning cycles per charge.
  • No more dealing with long and cumbersome pneumatic lines.
  • Achieve high level of tensioning force of 2,700 lbs for mid to heavy duty applications.
  • Use a powerful drill for high levels of tensioning force.
  • Reliable and longer-lifespan motor.
  • The tools exterior and interior are designed for used in tough and rugged applications.

Milwaukee Fuel Drill Benefits – The C11 cord strapping tool has a secret behind its high power configuration. It can be used with the Milwaukee Fuel Drill (patent pending driving system). Even if the motor / board goes bad, there are new drivers which are easily available and affordable.

High Level of Reliability

As one of the best cord strapping tools out there, the C11 cord tensioner is designed to be reliable and user-friendly. It features several modes:

  • Semi Automatic
  • Fully Automatic
  • Soft Corner

All these options makes it even more versatile for cord strapping in a wide range of industries and applications. Its high level of reliability comes from the factor that all the flaws and lags from the earlier counterparts have been removed. All the systems within the cord strapping tool are improved:

  • Battery technology
  • Motor technology
  • Board

So each cycle means highly reliable operation.

Cords

The C11 cord tensioner can be used with variety of woven and composite cord straps. It gives you a highly cost effective strapping alternative to steel. Eventually you will have a strapping output that is as strong as metal strapping but doesn’t rust.

STAY CONNECTED

Battery Tensioner for Cord Strapping

  By

Battery Tensioner for Cord Strapping

Latest battery tensioner for Optimal Performance & Productivity

The new battery tensioner tool can be used with ha wide range of cord strapping widths. It is designed for use with mid-duty applications and the latest technology features reliable brushless motor. These battery-run strapping tools are available in different versions. The advanced version can have a cutter for additional convenience. These tools are specifically valued for their lightweight yet durable build.

Benefits of Using Battery-Powered Tensioners

There are many benefits of using a battery tensioner. They are easier to use and don’t require air to power the strapping applications. Battery-based operation is much simpler and it does not involve the heaviness that comes with pneumatic tools. Besides, the tools have more ergonomic design, which combined with lightweight construction reduces operator fatigue.

Cord Strapping

Many battery-run tensioners are designed for use with cord strapping. They make it extremely easy and quick to pull the cord strapping tight. They also offer high level of convenience because there is no need to drag around the pneumatic lines. The batteries could last for anything ranging from 200 to 400 cycles depending on the model. But thanks to the latest battery technology, it is possible to recharge these tools to 80% power within 15-20 minutes.

These tools are nowhere behind their pneumatic counterparts in terms of power. Some of the battery-based strapping tools can generate peak tensioning force of up to 2,700 lbs.

Features

Some of the most important features that make a battery tensioner so special are as following:

  • These tensioners are specifically designed for use with specific strapping. In most cases, they are suited for use with PET and PP straps (plain and embossed).
  • They are designed for use with straps of specific widths or some tensioners are versatile to be used with different widths.
  • The battery-run strapping tools can generate peak tensioning of thousands of pounds.
  • Most battery-strapping tools are ergonomically designed for single hand operation.
  • They feature special new technology including Li-ion battery and brushless motor.
  • Some tensioners have special motor temperature monitoring systems to protect them against overheating.

The new battery tensioner units integrate the best and latest in available technology. They help in achieving optimal performance on all types of packaging floors. These tensioners are specifically designed to help save time and boost productivity. They help in achieving results that were difficult or impossible to achieve in the past.

Advantages of using new cord strap tool

  By

Advantages of using new cord strap tool

When it comes to cargo securing systems, the new cord strap tool systems are considered the best in terms of speed, ease of use and ergonomic designs. The latest tools are made from high quality steel that ensure durability and longevity.

Cordstrap strapping tools offer several advantages over other traditional tools designed for cargo securing. The heavy manual tools used for steel strapping suffer from high level of wear and tear because of regular contact with metal. On the other hand, the new cord strap tool systems experience minimal amount of wear and tear. They also don’t cost as much as their traditional alternatives and save more in the long term.

Cord Strapping at Allstrap

Ideal Strapping

There are three different types of cord straps which are used by these new tools. They are composite, woven and bonded straps. Composite cords offer the durability and strength offered by their steel counterparts. In place of friction weld / metal seals, these systems rely on steel buckles for holding the strap securely in place.

A unique thing about these new strapping tools is that they use a single tool – the tensioner for completing the task. They may be available in battery and manual models. The choice of the tools will however depend on the type of applications involved. Some of the best and latest of these tools can generate up to 2,700 lbs in tensioning force, which is even higher than that for conventional pneumatic tensioners. Even when generating so much of tensioning, they are safe and easy to use.

The woven straps are the woven forms of composite or bonded poly straps. They are typically made from high quality, high-tensile poly yarn. They offer high level of safety and cost effectiveness when it comes to securing cargo. Besides, they help in preventing any damage.

Advantages of Using Cord Strapping

  • They can be as strong as steel strapping
  • They are highly cost effective
  • The straps are safe for both operators and receivers
  • They are highly shock absorbent, especially when compared to steel
  • These straps don’t cause damages on the packages
  • They feature high level of strength
  • They can retain high level of tensioning

When it comes to the reliability of the buckles and straps for new cord strap tool, they are tested and certified for reliability. Besides, composite poly straps offer several advantages over traditional alternatives like steel strapping, plastic straps, metal banding and stretch films.

Safety First: A Manufacturer that Cares

  By

Signode is one of the most popular manufacturers of strapping tools, pneumatic, manual and battery. They make tools that are economic, and easy to operate. They are tools that are used widely all over the globe. Signode is considered to be the most innovative toolmaker in the industry, as their tools are very functional and efficient. They have an in-house design team that works on making new designs that are helpful to all needs of the industry.

Once a tool is manufactured, Signode makes sure that it is tested and tried by the end user before it hits the market. Signode also helps provide training to users when the customers purchases the tools. They are very concerned about the safety of the operators using their tools. This is one of the reasons why they decided to launch their tools in the market. They also help install equipment and trouble shoot, if the customer has a problem while operating their tool.

Signode brings out several products that are of use to the packaging industry. Some of the products are steel, poly and cord strapping, stainless steel strapping. For the best pricing go visit their number 1 distributor, Allstrap. They also have manually operated tools, pneumatic and battery-operated tools. Some of their most popular tools are the ones using the lithium ion batteries from Bosch. Presently, these battery-operated tools are widely used around the world as they are fast and efficient and help increase the productivity in the industries.

Signode’s tools are cost effective, light in weight and durable. None of their tools are known to break down in the middle of an operation. These tools can be operated at the touch of a button and very simple to operate. The use of wires has been eliminated and the wires lying around in the workroom do not hinder the operator. The work gets done faster and efficiently. These tools come with two batteries and a charger, so when one is put to work, the other gets charged. This saves a lot of time and productivity increases. The workers are also able to carry the tools around and do not wear out easily.  The Bosch battery is durable and longer lasting and charges in less than 45 minutes.

Allstrap carries all of Signode tools and also undertakes repairs of these tools in their high tech facility at a nominal cost. For more information on tools and their repairs, call Allstrap’s customer care department.

Fanciest Tool in The Industry

  By

The P329 is a battery powered combination tool for poly strapping. This new and improvised strapping tool uses the latest technology and is very convenient. There are several features in this tool, which were not possible in the earlier version. Fromm is a very innovative manufacturer and specializes in producing ergonomic tools that are simple and easy to operate. The latest technology used in these tools makes it a whole new experience for the operators.

The P329 uses the 18V lithium ion battery from Bosch, which is faster and increases productivity. The tool comes with two batteries. While one battery is in use the other gets charged and so a lot of time is saved. The tool is also very efficient and is not known to break down during an operation. This is due to the powerful and efficient brushless motor, which helps the battery last longer. The tool can also be easily carried about in the workroom and the use of wires is eliminated. As the operators are able to work without hindrance, work gets done faster.

Specifications

Strap Type: Polyester (PET) and polypropylene (PP) smooth and embossed

Strap Size: 5/8″ – 3/4″ X 0.02″ -0.053″

Weight: 9.2 lbs./ 4.2 kg (including battery)

Sealing Type: Friction weld. Joint strength 75%

Tension level: Up to 900 pounds

Battery: Li-Ion 18 volt 4 Ah or optional 5 Ah

Small and round packages can be strapped easily as the tool’s single base design makes it possible to squeeze into tight spaces. This tool is unlike other tools that have a single base under the feed wheel, which makes it difficult to remove the tool. This lever has been removed, so cycling the tool has become easier.  The tension button pulls the strap tight the tension can be preset. After the tension is pulled tight, the button automatically switches to weld and cut.

Any strapping mistake is eliminated while using the P329. The inbuilt motor controls the welding mechanism and makes sure the weld gets cooled. It is imperative to make the weld strong before the tool can be removed. According to Allstrap, P329 is an important tool to have in any packaging industry. This tool comes highly recommended for its features, which make strapping easier. The operator cannot pull off the tool with a hot weld and so damage to the tool due to hot weld is eliminated. For more information on tools and repairs, call Allstrap’s customer service department.

 Need your new P329 Tool Repaired? Send it to our tool repair department for a quick turnaround. There’s a battery strapping tool for everyone. Find your complementing tool for other widths:

1/2”-5/8” P328

5/8”-3/4” P329

1”-1.25” P331

1″- 1.25″ Pneumatic P359

The Newest Tool in the Industry- Now Available

  By

The P328 is a powerful strapping tool for poly strapping. Fromm is the most innovating manufacturer, and the P328 is the toughest battery-powered strapping tool brought out by them. This tool uses the best of technology and helps the packaging industry strap packages in a convenient and faster way. This has helped increase productivity and has also proven to be economical. Like other heavy-duty tools that are using the lithium ion battery, the P328 is also equipped with this high quality battery, which provides a longer run time between charges.

The P328 is an incredibly easy to use battery operated combination banding tool that is powerful and also easy to carry about in the workroom floor. Moreover, there are no wires running around the floor, so the operator is able to work without any hindrance. The battery in this tool lasts longer and there is no time wasted when the battery runs out as the other battery can be used while one is charging.

Specifications

Strap Size: 1/2″ – 5/8″ x 0.015″ – 0.041″

Strap Type: Polyester (PET) or Polypropylene (PP) smooth and embossed

Weight: 9.2 lbs/ 4.2 kg with battery 

Sealing Type: Friction weld. Joint strength, 75%

Tensioning: Up to 584 lbs.   

Battery: Li-Ion 18 volt 4 Ah or optional 5 Ah

The newly improvised P328 is very convenient with a single base. It can slide off easily and removed from round and small packages. Earlier the base under the feed wheel could not be opened, making it difficult to remove the tool. But now with the single base, it can slide out easily. By pressing the tension button the package is pulled tight, the tension can also be preset and it automatically moves to weld and cut.

The P328 helps keep the operators from making mistakes. For instance the weakest spot on the strap loop is the weld and so it is imperative to make it strong. As the tool uses the friction weld method of sealing, its own motor controls it and this makes sure the weld cools each time.    

According to Allstrap the P328 is the best strapping tool and it has become a staple in many industries.  It is flexible and easy to use. It doesn’t get damaged easily and is a tough tool.  While in other tools, the operator has to wait till the weld gets cooled, this tool holds the weld till it sets and there is an indicator which lights up when the operator can remove it. For more information for Allstrap’s tools, call their customer service department.

Best Tool in The Industry

  By

P331

As some of you may know, transporting packaged goods can be a big challenge for companies and those in the packaging industry. With new technology that not only simplify the man-labor, high-tech equipment like strapping tools and durable materials face the problem head on, and ultimately tackle the challenge.

One of these profitable tools is the P331, which has become a fundamental tool in the packaging industry. The P331 is a battery operated plastic strapping tool, and the state-of-the-art newest tool to hit the market. Manufactured by Fromm, this tool has proven to be very efficient, economical, and powerful.  The tension strength is up to 1600 pounds using the ¾” or 1.25 polyester strapping with ease.

The P331 looks similar to the P330 but has undergone minor changes as the sealing lever has been removed. There are now two buttons for operation on the auto mode. This tool is a great addition to the industries that are constantly looking to increase their productivity. The tool has helped operators get their work done faster.

Specifications

Strap: Polypropylene (PP) and Polyester (PET)

Strap size: 3/4″ to 1 1/4″ X .016″- .053″

Max Tension: Adjustable up to 1,600 lbs.

Seal Type: Friction weld sealing

Weight: 15 pounds

Tension speed: 2.5 inches per second

Weight: 14.1 pounds including 4.0 Ah Battery/ 6.4 Kg

Accessories

The P331 comes with two batteries and a charger. The battery is lithium ion from Bosch, and is considered to be the best in the industry. The great advantage in using this battery is that time is not wasted; while one battery is being used the other gets charged. This has helped increase the productivity, as well as longevity.  Using battery-operated tools is easier for the operators as all three functions of strapping, sealing and cutting are completed by touch of a button.

Sealing

The tool uses the friction weld method of sealing. This eliminates the use of steel seals and the cost of stocking them. Industry experts believe that this tool is very masterly in locking the weld down perfectly. As the tool is battery operated, there are no wires running around the workroom floor and this enables the operator to carry the tool around easily without hindrance. This has also proven to be an practical and money-saving tool.

According to Allstrap the P331 is the best heavy-duty tool in the industry. It can pull up to 7000 N and best suited for strapping up to 32mm width. Allstrap is a popular dealer who stocks all kinds of packaging tools and undertakes repair os these tools at a nominal cost. For more information on tools and repairs, call Allstrap’s customer service department.

Tough as Nails, Light as a Feather: The New Tool!

  By

We have partnered with Golden Bear as the manufacturer of their carbon fiber tooling parts.  We are putting in near net shape parts to reduce cost and complexity!  We take a 1.26 pound steel part and make it .26 pounds carbon fiber!

Carbon fiber is known for being tough.  We are known to make it cost effective!  We can hold tight tolerances for bearings, and reduce secondary processing saving time and money.

Want your own tool made from Carbon Fiber?  We can make it.  A one off hammer would cost about $1,000 including molding cost.  Once you get into production the cost comes way down, and is almost the same as machining small batches.  But of course, you get the weight savings and the sexy carbon fiber or carbon kevlar look.